Tanks to New Jersey

Denise KreklingProjects

Load of the Month - August 2018

  We coordinated the delivery of 4 tanks on two trailers to New Jersey. Each tank was 12 feet 6 inches long, 12 feet 2 inches wide, and 13 feet 9 inches high. The tanks are used at a water filtration facility as part of a well replacement project for a municipality.

Conestogas to Mexico

Denise KreklingProjects

  Recently, we coordinated the delivery of 3 fully loaded 53′ step deck conestoga trailers to Mexico. Each trailer held several pieces that are used in the assembly process to make garbage disposals.

Crane to New Mexico

Denise KreklingProjects

We coordinated the delivery of the bottom trolley block for a crane to New Mexico. The load was 56 feet long, 6 feet 10 inches wide, 13 feet 5 inches high, and 139,000 pounds.

Hydraulic Track to New Mexico

Denise KreklingProjects

We coordinated the delivery of a driveable, fully hydraulic track that is part of the third largest gantry crane in the world. When fully assembled, the crane will be able to lift over one million pounds. The load was 55 feet long, 9 feet 6 inches wide, 8 feet 2 inches high, and 180,000 pounds.

Forklift to Illinois

Denise KreklingProjects

Load of the Month April 2018 - Forklift to Illinois

We coordinated the delivery of a forklift chassis from the Port of Baltimore to Illinois. Three additional trucks are moving the remaining pieces of the forklift (counterweight, mast, carriage, etc.). The load was 26 feet 3 inches long, 15 feet 6 inches wide, 12 feet 10 inches high, and 64,000 pounds. Once assembled, the forklift weighs in at just under … Read More

Airplane to Kansas

Denise KreklingProjects

Load of the Month March 2018 - Airplane to Kansas

  We coordinated the delivery of an airplane body to Kansas. Due to its unique shape, it required two separate cranes to lower the airplane body onto the trailer correctly. The load was 50 feet 3 inches long, 8 feet 8 inches wide, 10 feet 8 inches high, and 20,000 pounds. The airplane will either be fixed or used for … Read More

Blast Resistant Modular Office to North Dakota

Denise KreklingProjects

Load of the Month February 2018 - Blast Resistant Modular Office to North Dakota

  We coordinated the delivery of a custom-built blast resistant modular office to North Dakota. There were two pieces to this project and each load was 58 feet long, 12 feet wide, 10 feet high, and 50,000 pounds.

Thrust Riding Ring to Washington

Denise KreklingProjects

Load of the Month January 2018 - Thrust Riding Ring to Washington

  We coordinated the delivery of a thrust riding ring from Ontario to Washington. The load was 13 feet 10 inches long, 10 feet 6 inches wide, 10 feet 6 inches high, and 41,000 pounds. The thrust riding ring is the main part of a rotary kiln. A rotary kiln is used to raise materials to a high temperature in … Read More

Generators to California

Denise KreklingProjects

ZMac Load of the Month December 2017 - Generators to California

Recently, we coordinated the delivery of several generators with enclosures from Wisconsin to California. The loads were 53 feet long, 12 feet 6 inches wide, 14 feet high, and 100,000 pounds each. The generators will be stacks one on top of the other and used for backup power at a data center.

Spiral Freezer to Missouri

Denise KreklingProjects

ZMac Load of the Month November 2017 - Spiral Freezer to Missouri

  Recently we coordinated the delivery of spiral freezer sections from Texas to Missouri. The load was 27 feet long, 12 feet 2 inches wide, 14 feet 7 inches high, and 22,100 pounds. The spiral freezer sections will be used to support the expansion of a frozen appetizer production plant.