Milling Ring to Texas

Impact NetworkingProjects

ZMac Load of the Month - Milling Ring to Texas

An enormous aluminum milling ring traveled to Texas in December. This load was 20 feet long, 16 feet 5 inches wide, 19 feet 6 inches high, and 85,980 pounds. The aluminum ring will be used to refine bauxite into aluminum oxide for commercial use.

Concrete Template Rings to South America

Impact NetworkingProjects

ZMac Load of the Month - Concrete Template to South America

  Reusable concrete template rings traveled to New Jersey and Florida, with their final destination in South America. These loads were 15 feet 6 inches long, 15 feet 6 inches wide, 3 feet high, and 42,000 pounds. The concrete template rings are used for the foundation of wind turbines. Wind turbines are used in wind farms onshore and offshore to … Read More

Telescopic Conveyor Belt to Canada

Impact NetworkingProjects

ZMac Load of the Month - Telescopic Conveyor Belt to Canada

A mobile telescopic conveyor belt and chassis traveled to Manitoba, Canada to build a dam in September. The mobile telescopic conveyor belt was 88 feet 6 inches long, 8 feet 6 inches wide, 11 feet 2 inches high, and 61,750 pounds and loaded onto the truck with a Mi-Jack. The chassis was 45 feet 9 inches long, 11 feet wide, … Read More

Drilling Equipment to Alabama

Impact NetworkingProjects

ZMac Load of the Month - Drilling Equipment to Alabama

Drilling equipment traveled from Florida to Alabama in May. The load was 66 feet long, 8 feet 6 inches wide, 8 feet 6 inches high, and 57,000 pounds.

Laser Cutter to Mississippi

Impact NetworkingProjects

ZMac Load of the Month - Laser Cutter to Mississippi

A laser cutter traveled from Quebec, Canada to Mississippi in April. The laser cutter will be used to cut various metals. The load was 37 feet long, 11 feet 1 inch wide, 9 feet high, and 38,000 pounds.

Concrete Pump to South Dakota

Impact NetworkingProjects

ZMac Load of the Month - Concrete Pump to South Dakota

A truck mounted concrete pump traveled from Wisconsin to South Dakota in March. The truck mounted concrete pump is a 5 arm boom that unfolds to 56 meters for placing concrete. The load was 51 feet 9 inches long, 8 feet 5 inches wide, 13 feet 2 inches high, and 109,000 pounds.

Telescopic Joint to California

Impact NetworkingProjects

ZMac Load of the Month - Telescopic Joint to California

A telescopic joint traveled from Texas to California with its final destination in Okpo, Korea. The telescopic joint compensates for rig heave and is a critical component of a drill ship. This load was 75 feet 7 inches long, 5 feet 10 inches wide, 5 feet 10 inches high, and 66,000 pounds.

Large Generators to Nevada

Impact NetworkingProjects

ZMac Load of the Month - Jan 2015

Large generators traveled from Wisconsin to Nevada in January. These generators ship individually, bundled in sets of three. Each set consists of one generator enclosure at 41 feet 6 inches long, 12 feet 10 inches wide, 13 feet 5 inches high, and 40,000 pounds; one fuel tank at 41 feet 3 inches long, 12 feet wide, 5 feet 5 inches … Read More

Generators to Louisiana

Impact NetworkingProjects

ZMac Load of the Month - Generators to Louisiana

Four loads containing generators traveled from Florida to Louisiana in December. Two loads were 34 feet long, 10 feet 7 inches wide, 11 feet 5 inches high, and 31,000 pounds. One load was 48 feet long, 11 feet 7 inches wide, 13 feet high, and 62,000 pounds. The last¬†load (pictured above) was 41 feet 9 inches long, 12 feet 7 … Read More

Shelters to South Dakota

Impact NetworkingProjects

ZMac Load of the Month - Shelters to South Dakota

Three loads containing pre-assembled shelters traveled from South Dakota to North Dakota in September. All three loads were 32 feet 6 inches long, 16 feet wide, 12 feet 8 inches high and 20,000 pounds. The shelters are part of a large Fiber to the Home (FTTH) project and will house electronic and backup power.