Steel Tank to Texas

Denise Krekling

ZMac Load of the Month - Steel Tank to Texas

A large steel tank traveled to Texas recently. The steel tank was 75 feet 11 inches long, 11 feet 1 inch wide, 13 feet 7 inches high, and 44,000 pounds. The steel tank will be used at a facility where they develop rockets.

Large Motor to Oklahoma

Denise KreklingProjects

ZMac Load of the Month - Large Motor to Oklahoma

A large door motor traveled from Texas to Oklahoma recently. The motor was 59 feet 9 inches long, 10 feet 10 inches wide, 10 feet 3 inches high, and 165,500 pounds. The large door motor will be used to open large bay doors at a nearby facility.

Boom Crane to Nevada

Denise KreklingProjects

ZMac Load of the Month - Boom Crane to Nevada

A chassis and boom crane/trailer traveled from California to Nevada. The boom crane/trailer was 58 feet 4 inches long, 8 feet 4 inches wide, 13 feet 1 inch high, and 172,000 pounds. These loads were traveling to the World of Concrete trade show at the Las Vegas Convention Center in Las Vegas, Nevada where they were on display inside the … Read More

Milling Ring to Texas

Denise KreklingProjects

ZMac Load of the Month - Milling Ring to Texas

An enormous aluminum milling ring traveled to Texas in December. This load was 20 feet long, 16 feet 5 inches wide, 19 feet 6 inches high, and 85,980 pounds. The aluminum ring will be used to refine bauxite into aluminum oxide for commercial use.

Concrete Template Rings to South America

Denise KreklingProjects

ZMac Load of the Month - Concrete Template to South America

  Reusable concrete template rings traveled to New Jersey and Florida, with their final destination in South America. These loads were 15 feet 6 inches long, 15 feet 6 inches wide, 3 feet high, and 42,000 pounds. The concrete template rings are used for the foundation of wind turbines. Wind turbines are used in wind farms onshore and offshore to … Read More

Telescopic Conveyor Belt to Canada

Denise KreklingProjects

ZMac Load of the Month - Telescopic Conveyor Belt to Canada

A mobile telescopic conveyor belt and chassis traveled to Manitoba, Canada to build a dam in September. The mobile telescopic conveyor belt was 88 feet 6 inches long, 8 feet 6 inches wide, 11 feet 2 inches high, and 61,750 pounds and loaded onto the truck with a Mi-Jack. The chassis was 45 feet 9 inches long, 11 feet wide, … Read More

Drilling Equipment to Alabama

Denise KreklingProjects

ZMac Load of the Month - Drilling Equipment to Alabama

Drilling equipment traveled from Florida to Alabama in May. The load was 66 feet long, 8 feet 6 inches wide, 8 feet 6 inches high, and 57,000 pounds.

Laser Cutter to Mississippi

Denise KreklingProjects

ZMac Load of the Month - Laser Cutter to Mississippi

A laser cutter traveled from Quebec, Canada to Mississippi in April. The laser cutter will be used to cut various metals. The load was 37 feet long, 11 feet 1 inch wide, 9 feet high, and 38,000 pounds.

Concrete Pump to South Dakota

Denise KreklingProjects

ZMac Load of the Month - Concrete Pump to South Dakota

A truck mounted concrete pump traveled from Wisconsin to South Dakota in March. The truck mounted concrete pump is a 5 arm boom that unfolds to 56 meters for placing concrete. The load was 51 feet 9 inches long, 8 feet 5 inches wide, 13 feet 2 inches high, and 109,000 pounds.

Telescopic Joint to California

Denise KreklingProjects

ZMac Load of the Month - Telescopic Joint to California

A telescopic joint traveled from Texas to California with its final destination in Okpo, Korea. The telescopic joint compensates for rig heave and is a critical component of a drill ship. This load was 75 feet 7 inches long, 5 feet 10 inches wide, 5 feet 10 inches high, and 66,000 pounds.